Views: 302 Author: Site Editor Publish Time: 2019-11-08 Origin: Site
Most motorcycle riders should have experienced the motorcycle falling. For a long time, motorcycle drivers have been looking for the anti-fall tips.
The in-situ astern referred to includes the falling of the motorcycle traveling at very low speed, in addition to the case where the motorcycle directly falls down during parking.
Reason 1: When straddling on a motorcycle, the landing performance of both feet is not good, resulting in the inability to support the tilted body.
Reason 2: The motorcycle is tilted when moving the body, which makes it impossible to bear the weight of the motorcycle.
Reason 3: The engine fails or loses balance at very low speeds, which makes it cannot support the car body.
Reason 4: When the road is wet or parked on a sand-filled road, the motorcycle will fall because of the slippery. Therefore, it needs to pay special attention to whether the anti-slip structure of the sole has been smoothed.
Most of the most common causes of motorcycle falling are tyre skidding caused by some reasons, such as loss of grip, collision accidents with other vehicles and so on.
Reason 1: The emergency brake causes the tire to lock up and leads to skid and fall.
Reason 2: The pavement is full of water or sand, which reduces the friction of the pavement and causes the tire to lose its grip, leading to skid and fall.
Reason 3: In order to avoid danger, suddenly grasp the handle to the end and cause skidding and falling.
Reason 4: Collision with other vehicles.
(1)Improving Landing on Both Feet
If both feet can be stepped on the ground steadily, even if the body sways, it can easily keep upright. The modification methods include reducing the sponge thickness of the cushion, making the front fork protrude a little, adding a lower connecting rod to the rear shock absorber, and softening the preload setting of the rear shock absorber.
(2)Adjust Grip Position
Changing the position of the handle by motorcycle tools will make the handle closer to the body, and the motorcycle will become easier to control. Generally speaking, compared with the separate grip, the integrated grip will be higher and closer to the knight's body, so it will be easier to make U-shaped rotation.
(3)Adjust the Various Parts of the Motorcycle Body
The force when grasping the clutch lever is lighter or changed to the type that can adjust the distance between the levers. In order to make it easier to apply the semi-clutch and not let the engine turn off easily, you can increase the speed of the idle speed and fine-tune the parts of the motorcycle body.
Most of the motorcycle fallings are caused by the instability of the center of gravity and the sudden drop of adhesion between the wheels and the ground. In addition to the driver's skills and experience, suitable models can greatly reduce the chance of crashing.
A helmet with a mask allows the driver to look at the road surface when you are blowing in the wind, raining and flying sand. As for the bumper and knee pads, it only works after the falling, and it is not within the scope of discussion.
Although different types of vehicles are equipped differently, now the industry has introduced a variety of devices that can avoid falling problems. For example, "ABS" can prevent tire locking. "CBS" can connect and distribute front and rear brake lanes to make brakes close to the ideal state. "CBRS" can reduce the probability of falling due to braking control. In addition, the Low RPM Assist System is not only used to avoid speed reduction when the clutch is engaged and to prevent engine misfire during start-up, but also very useful in traffic jam and U-turn. Drivers who are not good at low-speed riding should also be able to reduce the fear caused by the engine stalling through this system.
The road conditions in China are complicated. Even if you are driving at a straight road, you should be vigilant. Regardless of the motorcycle you drive, you must maintain a high degree of driving premonition. For example observe the cars and people on both sides, which may have the possibility of running out of the driveway. Keep a safe distance from the vehicles in front and rear. If the front car stops slowly, keep a distance of two meters when passing it to prevent that someone suddenly opens the door and gets out of the car. Also pay attention to the road conditions. Always pay attention to the rear view mirror, turn the turn signal to avoid rear-end collision. Low speed allows you to have enough warning to avoid danger. Do not drive when you are drunk or have a sudden drop in vision.
Before parking the motorcycle, you should fully observe the surrounding conditions, including whether there are worn billboards on the top of the head to ensure the safety of the motorcycle.
In a word, you need to learn some knowledge to avoid falling and ride cautiously. In addition, considering that in case of unexpected circumstances, it is also a good choice to insure any insurance in advance.
We are a factory engaged in producing motorcycle bolts, motorcycle stand and wheel chock, motorcycle tie down, motorcycle tool, and plastic can. If you are interested in our motorcycle tools, please contact us at any time.
