Views: 258 Author: Site Editor Publish Time: 2019-11-22 Origin: Site
Most motorcycle enthusiasts want to be able to maintain the performance of the motorcycle. At the same time, regular maintenance of motorcycles with the correct method can also improve the safety of motorcycles.
Many people think that the motor oil of total synthesis is the best, and all of the motorcycles can use it. In fact, this is not right, the motor oil of total synthesis is not necessarily the best choice, and sometimes the motor oil of total synthesis will make your car in malfunction.
Because the viscosity of the motor oil of total synthesis is very low, the performance of the fan is not good, but there are some engines which are air-cooled. Hence, the viscosity of the oil is high, so it is strictly forbidden to use this kind of motor oil. At the same time, if the motor oil is used for a long period of time, problems such as large clearance of valve may occur.
There are a lot of people who like to adjust the idling speed to a low level, and some even adjust it to 800 rpm. In fact, this is very detrimental to the motorcycle. When the idling speed is low, the crankshaft is very bad, and the small chain is easy to stretch out. it is because the inertia of the crankshaft is insufficient, or the idling speed is very low, or the impact of the upper and lower vibrations of the vehicle is large, and the force on the components increases.
You may know that the higher the compression ratio is, the higher the label for the required gasoline will be, but it does not mean that the gasoline of higher label is the better one. The label of gasoline represents the antiknock of gasoline. That is to say, the higher the label of gasoline is, the slower the speed of burning will be. If a car that needs 90# gasoline, but we use use No. 98 gasoline for a long period, there will be problems such as insufficient burning. For a car that requires No. 98 gasoline, if the No. 90 gasoline is used, the engine will explode in some cases.
First, the clearance of valve affects the ventilation of the entire engine, affecting the engine's afterburning period. After the clearance is reduced, the sound of the motorcycle will become smaller while the afterburning period will become shorter. And the fuel consumption increases, the cylinder temperature increases as well, and the engine is also prone to unstable speed.
If the clearance is too large, the burning period will become longer, and the power of the vehicle will decrease. Also, the sound will become louder.
Furthermore, we should also pay attention to other parts of motorcycles and keep some motorbike tools in hand, such as motorcycle plastic petrol containers will be needed in special time. That’s all, hope my words can be helpful.
