Views: 282 Author: Site Editor Publish Time: 2020-02-06 Origin: Site
The engine of the motorcycle belongs to the high rotation that drives the rear wheels forward through a chain drive. At present, besides scooters, most gear cars are driven by chain. Because the chain has been exposed for a long time, motorcycle chains which often run long distances in suburbs are easy to wear out and dirty. Let's talk about the common problems in motorcycle chain maintenance.
A: At present, there are 2 chain cleaning agents suitable for the oil seal chain. They are MOTOREX and car wash cleaners, which do not hurt the oil seal. Of course they can also be used for non-oil seal chains.
A: When a motorcycle rides more than 3000 kilometers, you can maintain or change the chain. If you ride on a bad road, a lot of sediment and oil can be cleaned and maintained in advance.
A: If the chain is relatively clean, you can spray it when you drive 200-300 kilometers. In principle, as long as the chain is dry, you can spray. You can spray it before you travel short distances. After the rain, the chain is prone to lack of oil. So after the rain has passed, it should be sprayed once.
A: The friction between the chain and the gear is on the chain ball, and the chain links are directly linked. Therefore, chain oil and chain wax should be sprayed on the inner part of the chain and the ball part as much as possible. And spraying on the outside of the chain section has the waterproof and rustproof effect.
A: If the chain is not cleaned for a long time, the consequences may be abnormal, the front and rear gears will accelerate the wear and tear, and finally cause the chain to break. It is recommended to do the cleaning regularly. The frequency can be determined according to the mileage and road conditions, about 2-3 times a year.
A: It is best to use the special motorcycle tools, if you want to do it with yourself. However, please note that it is necessary to make sure the motorcycle is off before performing chain maintenance. Someone used to break the finger because of the chain maintenance. You can use the motorcycle stand to frame the rear wheel, hang the neutral gear, and turn the rear wheel for maintenance. This is the safest operation. However, it is still recommended that you let the professional carry out chain maintenance.
Chain is one of the important parts of motorcycle, but it is also one of the parts that motorcycle riders tend to overlook. It will not come to mind that the chain itself has never been maintained and repaired until the chain breaks down. The poor quality of the chain will directly affect the control of motorcycle and the comfort and reliability of driving. Only by being diligent in daily maintenance can the chain last longer and drive smoother.
Founded in 2008, JIAXING JUJIE HARDWARE TOOL CO.,LTD is located in Jiaxing, Zhejiang. It is a factory engaged in producing motorcycle bolts, motorcycle stand/lift and wheel chock, motorcycle tie down, motorcycle tool, and plastic can. If you are interested in our motorcycle tools, please contact us at any time.
